1-Hook for Dometic Power Rail in Campervan – STL & 3MF 3D Printing Files with Detailed Instructions

1-Hook for Dometic Power Rail – 3D Printable STL & 3MF Files

Keep your campervan or motorhome organized with this practical 1-hook for the Dometic power rail. The hook is designed to be mounted directly to the Dometic rail and provides a convenient place to hang lightweight items such as towels, bags, kitchen utensils, cables or other everyday accessories.

This is a digital 3D printing product. No physical product will be shipped.

What you will receive

Your download includes:

• STL file – suitable for virtually all FDM/FFF 3D printers

• 3MF file – ready-to-use project file with the recommended print orientation and settings

• Detailed printing instructions

• Recommended material and print parameters

The 3MF file makes printing particularly easy, while the STL file gives you maximum flexibility if you want to use your own slicer settings or a different 3D printer.

Recommended material

PETG is recommended for this product because it offers a good combination of strength, durability and temperature resistance.

PLA can also be used for applications where high temperature resistance is not required. However, PLA has a lower temperature resistance than PETG and may soften or deform when exposed to higher temperatures, for example inside a vehicle parked in direct sunlight.

Recommended print settings

The following settings are recommended as a starting point:

• Nozzle: 0.4 mm

• Layer height: 0.20 mm

• Material: PETG

• Filament profile: Bambu Lab PETG Basic or Generic PETG, depending on the filament used

• Walls: 6

• Infill: 20%

• Infill pattern: Rectilinear

• Supports: Tree / Organic Supports – Auto

• Orientation: As provided in the STL/3MF file

The exact settings may need to be adjusted depending on your 3D printer, filament and slicer.

Designed for campervans and motorhomes

The hook is designed specifically for use with the Dometic power rail system and is intended as a simple, practical accessory for campervan and motorhome interiors.

It is particularly useful when you want additional hanging space without permanently drilling or modifying your vehicle.

Digital download – no physical product

Please note that this listing is for digital 3D printing files only.

You will receive the files needed to print the hook yourself. A 3D printer and suitable filament are required. No physical hook will be shipped.

Important information

3D printed parts can vary depending on the printer, filament, print orientation and print settings. The recommended settings are intended as a starting point and should be checked and adapted if necessary.

Before using the printed part, make sure that it has been printed correctly and that the material and print settings are suitable for your intended application.

Dometic is a registered trademark of Dometic Group AB. This product is an independently developed accessory and is not manufactured, sponsored or endorsed by Dometic.