Quick-Clip Halter für Roller Team Livingstone – Ersatz für die Tischgleitschiene

Roller Team Livingstone Table Holder – Quick-Clip Replacement for the Dinette Table, Set of 2

€21,99
Skip to product information
Quick-Clip Halter für Roller Team Livingstone – Ersatz für die Tischgleitschiene

Roller Team Livingstone Table Holder – Quick-Clip Replacement for the Dinette Table, Set of 2

€21,99
Taxes included. Shipping calculated at checkout.

Replacement for the Quick-Clip table holder in the Roller Team Livingstone

In the Roller Team Livingstone panel van, the dinette table hangs on an aluminium rail with Quick-Clip holders. These holders tend to break over time – then the table wobbles or no longer holds. Our holders are a reinforced replacement, strengthened at the original’s breaking points.

Fits

  • Roller Team Livingstone (panel van)
  • comparable Roller Team panel vans with a table rail with an outer diameter of 15 mm

Please compare your holder with the product photos before ordering.

Your benefits

  • Stronger than the original: reinforced at the breaking points
  • Durable: heat-resistant material, stiff and not brittle
  • Precise fit: made for the rail in the Livingstone
  • Quick to install: with the original screws

Installation

Unscrew the old holders, screw on the new holders with the original screws, hook in the table.

What’s included

  • 2 × Quick-Clip table holders
  • Not included: screws and table rail (reuse the original screws)

Different vehicle or not sure the holder fits? See all Quick-Clip holders with an overview here – or send us a photo of your table rail at shop@3dprints4vans.com.

Important note

This product is a 3D-printed accessory or replacement part, not an original part from the vehicle, furniture or table system manufacturer. All company, brand and product names are used solely to identify and describe compatibility. There is no business relationship with the manufacturers mentioned.

Product safety

Manufacturer: 3dPrints4Vans, Frank Amrhein, Karlstr. 8/1, 71069 Sindelfingen, Germany, shop@3dprints4vans.com

Safety information:

  • Not suitable for children under 3. Keep out of reach of children and do not use as a toy – small parts can be swallowed (choking hazard).
  • The material may cause allergic reactions. Wear suitable protection if necessary.
  • Take care when installing and removing; sharp edges can occur if the part breaks. Use suitable tools and protective equipment if needed.
  • Before use, check that the holders are fitted correctly and the table is securely hooked in.
Rechtliche Hinweise

Alle genannten Firmen-, Marken- und Warennamen dienen ausschließlich zur Identifikation der Produkte. Kein Originalersatzteil. Keine Geschäftsbeziehung zu den genannten Unternehmen.

Das könnte dich auch interessieren