Router holder for Huawei LTE Router E5786 for gluing/screwing Camper Van Motorhome Caravan LTE for 4G Router holder WLAN holder

Ideal for van conversions or upgrading your camper for more self-sufficiency, space-saving router holder for campers. The router is securely mounted in the campervan by screwing or gluing it onto a smooth surface. Easy installation (gluing): The double-sided adhesive strips are already pre-mounted on the holder. All you have to do is clean the opposite side to remove any grease, remove the cover from the adhesive strips, and then press the holder firmly on - and you're ready to go! Easy installation (screws): Mark the screw position, pre-drill the hole with a 1.5mm drill, then screw the holder tight with the screws - done! The router is made of sturdy and durable PETG, so you can enjoy the item for a long time. The router mount provides a secure and space-saving attachment for the router, so that it can be securely mounted in the camper or van without taking up valuable storage space. It can be operated at any time. Access to the antenna ports and the charging port is provided. I use PETG filament for printing because it is much more durable and temperature resistant than regular PLA. You can be sure that your product will withstand normal use without any problems. Please note that due to the 3D printing process, there may be small imperfections (light surface texture due to layer structure, cosmetic defects), but these do not affect the quality or performance of the product. Delivery without router and antenna Supplied with screws (please check whether the length is correct or whether they are too long for the wall thickness of the board)

_____________________________________________

Made in Germany.

All company names, brand names and trademarks used in my offers are the property of their respective owners and are used only to identify and describe the products and services. No liability is assumed for accuracy, completeness and timeliness. I do not sell original spare parts and do not have any business relationship with the companies mentioned.

Product safety information:

Manufacturer:
3dPrints4Vans, Frank Amrhein, Karlstr. 8/1, 71069 Sindelfingen
shop [!at] 3dprints4vans.com

Safety instructions:

Warning: Not suitable for children under 3 years.
The product should always be kept out of the reach of children. The product is not to be used as a toy. It can be swallowed and cause a choking hazard.

• Contact allergies:
The product can cause allergic reactions to fats, oil, zinc or nickel due to the raw material used, the manufacturing process and the surface. Please pay attention to this and take appropriate protection by wearing suitable protective equipment.

• Risk of injury:

Care must be taken when assembling and disassembling the product. Use only suitable tools and appropriate protective equipment.