Zwei Quick-Clip Halter für Pössl, Clever Vans und Globecar – Ersatz für die Tischgleitschiene

Pössl Table Holder: Quick-Clip Holders for Reimo Table Rail 57056 – Set of 2, also for Clever Vans & Globecar

$27.00
Skip to product information
Zwei Quick-Clip Halter für Pössl, Clever Vans und Globecar – Ersatz für die Tischgleitschiene

Pössl Table Holder: Quick-Clip Holders for Reimo Table Rail 57056 – Set of 2, also for Clever Vans & Globecar

$27.00
Taxes included. Shipping calculated at checkout.

Replacement for the Quick-Clip table holder in Pössl, Clever Vans and Globecar

Your dinette table wobbles or no longer locks in place? Usually one of the original Quick-Clip holders on the Reimo table rail has broken. Our holders are a reinforced replacement: we added material exactly where the original typically breaks.

Fits

Vehicles with the Reimo table rail 57056 (part no. 01568T99287, 12 mm outer diameter):

  • Pössl D-Line: 2Win, 2Win R, 2Win S, 2Win RS, Roadcamp R, Roadcruiser, Roadstar 600 L, Roadcruiser Revolution, Roadcruiser XL
  • Pössl H-Line: 2Win Vario, Vario 545
  • Pössl: Trenta 640, Summit 540, Summit 600 L, Summit 600 LR, Summit Shine 540, Summit Shine 600 L, Summit Shine 600 LR
  • Clever Vans: Tour 540, Celebration 600, Spirit 600, Vario Kids 600, Runner 636, Runner 636 Active
  • Globecar: Globescout Vario, Summit 600, Summit 600 B, Summit 640

What matters is the table rail fitted in your vehicle. Please compare your holder with the product photos before ordering.

Your benefits

  • Stronger than the original: reinforced at the breaking points
  • Durable: made of GreenTEC Pro – heat-resistant, stiff and not brittle
  • Precise fit: designed for the Reimo table rail 57056
  • Quick to swap: move the slider and spring from the old holder, done

Installation

Take the slider and spring out of the original holder, insert them into the new holder and hook the holder back in. If a small part is missing, just ask us.

What’s included

  • 2 × Quick-Clip table holders
  • Not included: slider, spring and table rail (reused from the original)

Different vehicle or not sure the holder fits? See all Quick-Clip holders with an overview here – or send us a photo of your table rail at shop@3dprints4vans.com.

Important note

This product is a 3D-printed accessory or replacement part, not an original part from the vehicle, furniture or table system manufacturer. All company, brand and product names are used solely to identify and describe compatibility. There is no business relationship with the manufacturers mentioned.

Product safety

Manufacturer: 3dPrints4Vans, Frank Amrhein, Karlstr. 8/1, 71069 Sindelfingen, Germany, shop@3dprints4vans.com

Safety information:

  • Not suitable for children under 3. Keep out of reach of children and do not use as a toy – small parts can be swallowed (choking hazard).
  • The material may cause allergic reactions. Wear suitable protection if necessary.
  • Take care when installing and removing; sharp edges can occur if the part breaks. Use suitable tools and protective equipment if needed.
  • Before use, check that the holders are fitted correctly and the table is securely hooked in.
Rechtliche Hinweise

Alle genannten Firmen-, Marken- und Warennamen dienen ausschließlich zur Identifikation der Produkte. Kein Originalersatzteil. Keine Geschäftsbeziehung zu den genannten Unternehmen.

Das könnte dich auch interessieren